Parametric drill stop

door ksuszka

Printbare bestanden (24)

  • stl

    drill_stop_metric_set.stl

    4.2 Mo · 4 382 downloads

    Downloaden
  • stl

    drill_stop_imperial_set.stl

    3.9 Mo · 4 265 downloads

    Downloaden
  • stl

    drill_stop_metric_3.stl

    361 Ko · 4 268 downloads

    Downloaden
  • stl

    drill_stop_metric_3.5.stl

    449 Ko · 4 236 downloads

    Downloaden
  • stl

    drill_stop_metric_4.stl

    245 Ko · 4 258 downloads

    Downloaden
  • stl

    drill_stop_metric_4.5.stl

    331 Ko · 4 208 downloads

    Downloaden
  • stl

    drill_stop_metric_5.stl

    321 Ko · 4 287 downloads

    Downloaden
  • stl

    drill_stop_metric_6.stl

    399 Ko · 4 300 downloads

    Downloaden
  • stl

    drill_stop_metric_7.stl

    263 Ko · 4 227 downloads

    Downloaden
  • stl

    drill_stop_metric_8.stl

    468 Ko · 4 299 downloads

    Downloaden
  • stl

    drill_stop_metric_9.stl

    407 Ko · 4 210 downloads

    Downloaden
  • stl

    drill_stop_metric_10.stl

    435 Ko · 4 261 downloads

    Downloaden
  • stl

    drill_stop_metric_11.stl

    297 Ko · 4 207 downloads

    Downloaden
  • stl

    drill_stop_metric_12.stl

    358 Ko · 4 217 downloads

    Downloaden
  • stl

    drill_stop_imperial_1_8.stl

    425 Ko · 4 198 downloads

    Downloaden
  • stl

    drill_stop_imperial_5_32.stl

    497 Ko · 4 187 downloads

    Downloaden
  • stl

    drill_stop_imperial_3_16.stl

    524 Ko · 4 196 downloads

    Downloaden
  • stl

    drill_stop_imperial_7_32.stl

    434 Ko · 4 190 downloads

    Downloaden
  • stl

    drill_stop_imperial_1_4.stl

    282 Ko · 4 193 downloads

    Downloaden
  • stl

    drill_stop_imperial_5_16.stl

    506 Ko · 4 191 downloads

    Downloaden
  • stl

    drill_stop_imperial_3_8.stl

    566 Ko · 4 196 downloads

    Downloaden
  • stl

    drill_stop_imperial_7_16.stl

    435 Ko · 4 170 downloads

    Downloaden
  • stl

    drill_stop_imperial_1_2.stl

    346 Ko · 4 197 downloads

    Downloaden
  • stl

    drill_stop_imperial_9_16.stl

    162 Ko · 2 785 downloads

    Downloaden

Beschrijving

I don't like drill stop designs where a screw touches the drill, as they tend to skew on the drill, especially on drills with thin blades, like wood drills. With this design, the whole inner surface of the drill stop holds the drill.

To assembly it, you need an M3 washer, M3 nut and M3 screw, 12mm length (it may be a little bit shorter for smaller drill diameters). The nut should be a very tight fit to prevent turning.

A tip for an easy insertion of the nut:

  • insert a long M3 screw (at least 20mm) through the screw hole
  • put the nut on this screw and screw it till the nut is in the position
  • gently unscrew the long screw leaving the nut in the place
  • put the washer and the final screw

Tags

#drill #drilling #drill guide #drill stop #openscad #tool