Parametric drill stop
por ksuszka
Archivos imprimibles (24)
-
stldrill_stop_metric_set.stl
4.2 Mo · 4 382 descargas
-
stldrill_stop_imperial_set.stl
3.9 Mo · 4 265 descargas
-
stldrill_stop_metric_3.stl
361 Ko · 4 268 descargas
-
stldrill_stop_metric_3.5.stl
449 Ko · 4 236 descargas
-
stldrill_stop_metric_4.stl
245 Ko · 4 258 descargas
-
stldrill_stop_metric_4.5.stl
331 Ko · 4 208 descargas
-
stldrill_stop_metric_5.stl
321 Ko · 4 287 descargas
-
stldrill_stop_metric_6.stl
399 Ko · 4 300 descargas
-
stldrill_stop_metric_7.stl
263 Ko · 4 227 descargas
-
stldrill_stop_metric_8.stl
468 Ko · 4 299 descargas
-
stldrill_stop_metric_9.stl
407 Ko · 4 210 descargas
-
stldrill_stop_metric_10.stl
435 Ko · 4 261 descargas
-
stldrill_stop_metric_11.stl
297 Ko · 4 207 descargas
-
stldrill_stop_metric_12.stl
358 Ko · 4 217 descargas
-
stldrill_stop_imperial_1_8.stl
425 Ko · 4 198 descargas
-
stldrill_stop_imperial_5_32.stl
497 Ko · 4 187 descargas
-
stldrill_stop_imperial_3_16.stl
524 Ko · 4 196 descargas
-
stldrill_stop_imperial_7_32.stl
434 Ko · 4 190 descargas
-
stldrill_stop_imperial_1_4.stl
282 Ko · 4 193 descargas
-
stldrill_stop_imperial_5_16.stl
506 Ko · 4 191 descargas
-
stldrill_stop_imperial_3_8.stl
566 Ko · 4 196 descargas
-
stldrill_stop_imperial_7_16.stl
435 Ko · 4 170 descargas
-
stldrill_stop_imperial_1_2.stl
346 Ko · 4 197 descargas
-
stldrill_stop_imperial_9_16.stl
162 Ko · 2 785 descargas
Descripción
I don't like drill stop designs where a screw touches the drill, as they tend to skew on the drill, especially on drills with thin blades, like wood drills. With this design, the whole inner surface of the drill stop holds the drill.
To assembly it, you need an M3 washer, M3 nut and M3 screw, 12mm length (it may be a little bit shorter for smaller drill diameters). The nut should be a very tight fit to prevent turning.
A tip for an easy insertion of the nut:
- insert a long M3 screw (at least 20mm) through the screw hole
- put the nut on this screw and screw it till the nut is in the position
- gently unscrew the long screw leaving the nut in the place
- put the washer and the final screw