Latching Network Cable Organizer selection
von gdoniu93
Druckbare Dateien (12)
-
stl5x_-_5x_1-2.stl
38 Ko · 733 Downloads
-
stl2x_-_2x_2-2.stl
41 Ko · 703 Downloads
-
stl2x_-_2x_1-2.stl
38 Ko · 700 Downloads
-
stl3x_-_3x_1-2.stl
38 Ko · 714 Downloads
-
stl4x_-_4x_2-2.stl
49 Ko · 752 Downloads
-
stl7x_-_7x_2-2.stl
61 Ko · 753 Downloads
-
stl3x_-_3x_2-2.stl
45 Ko · 715 Downloads
-
stl4x_-_4x_1-2.stl
38 Ko · 751 Downloads
-
stl6x_-_6x_2-2.stl
57 Ko · 735 Downloads
-
stl5x_-_5x_2-2.stl
53 Ko · 733 Downloads
-
stl7x_-_7x_1-2.stl
38 Ko · 762 Downloads
-
stl6x_-_6x_1-2.stl
38 Ko · 731 Downloads
Beschreibung
This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution.
No screws and nuts are required in this project.
Make your network environment nice and clean with this network cable organizer.