Latching Network Cable Organizer selection
por gdoniu93
Archivos imprimibles (12)
-
stl5x_-_5x_1-2.stl
38 Ko · 727 descargas
-
stl2x_-_2x_2-2.stl
41 Ko · 698 descargas
-
stl2x_-_2x_1-2.stl
38 Ko · 694 descargas
-
stl3x_-_3x_1-2.stl
38 Ko · 707 descargas
-
stl4x_-_4x_2-2.stl
49 Ko · 746 descargas
-
stl7x_-_7x_2-2.stl
61 Ko · 747 descargas
-
stl3x_-_3x_2-2.stl
45 Ko · 709 descargas
-
stl4x_-_4x_1-2.stl
38 Ko · 744 descargas
-
stl6x_-_6x_2-2.stl
57 Ko · 730 descargas
-
stl5x_-_5x_2-2.stl
53 Ko · 728 descargas
-
stl7x_-_7x_1-2.stl
38 Ko · 757 descargas
-
stl6x_-_6x_1-2.stl
38 Ko · 726 descargas
Descripción
This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution.
No screws and nuts are required in this project.
Make your network environment nice and clean with this network cable organizer.