Latching Network Cable Organizer selection
by gdoniu93
Printable files (12)
-
stl5x_-_5x_1-2.stl
38 Ko · 727 downloads
-
stl2x_-_2x_2-2.stl
41 Ko · 698 downloads
-
stl2x_-_2x_1-2.stl
38 Ko · 694 downloads
-
stl3x_-_3x_1-2.stl
38 Ko · 707 downloads
-
stl4x_-_4x_2-2.stl
49 Ko · 746 downloads
-
stl7x_-_7x_2-2.stl
61 Ko · 747 downloads
-
stl3x_-_3x_2-2.stl
45 Ko · 709 downloads
-
stl4x_-_4x_1-2.stl
38 Ko · 744 downloads
-
stl6x_-_6x_2-2.stl
57 Ko · 730 downloads
-
stl5x_-_5x_2-2.stl
53 Ko · 728 downloads
-
stl7x_-_7x_1-2.stl
38 Ko · 757 downloads
-
stl6x_-_6x_1-2.stl
38 Ko · 726 downloads
Description
This is network cable organizer which allows you to clamp from 2 up to 7 6.5mm network cables together. Every clamp consists of two parts 1/2 and 2/2. After printing remove supports and connect them together by simply clicking on piece on another as depicted in the picture. Every clamp allows you for easy adding and removing cables by using simple latching solution.
No screws and nuts are required in this project.
Make your network environment nice and clean with this network cable organizer.