Mini ITX Computer Case - Modular / Stackable
by Kurakuea
Printable files (24)
-
stlITX_Stacker_Slim_-_Front_Panel_with_Power_and_LED_v2.0.stl
23 Ko · 3 826 downloads
-
stlITX_Stacker_Standard_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 817 downloads
-
stlITX_Stacker_Standard_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 818 downloads
-
stlITX_Stacker_Slim_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 810 downloads
-
stlITX_Stacker_Slim_-_Vent_Panel_v2.0.stl
160 Ko · 3 807 downloads
-
stlITX_Stacker_-_MB_Tab_Lock_v1.0.stl
22 Ko · 3 802 downloads
-
stlITX_Stacker_Standard_-_Hard_Drive_Bracket_v1.0.stl
300 Ko · 3 836 downloads
-
stlITX_Stacker_Standard_-_Vent_Panel_v2.0.stl
189 Ko · 3 794 downloads
-
stlITX_Stacker_Standard_-_Dual_Fan_Panel_v2.0.stl
215 Ko · 3 793 downloads
-
stlITX_Stacker_Slim_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 784 downloads
-
stlITX_Stacker_Slim_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 784 downloads
-
stlITX_Stacker_Standard_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 794 downloads
-
stlITX_Stacker_Standard_-_Front_Panel_with_Power_v2.0.stl
17 Ko · 3 791 downloads
-
stlITX_Stacker_Slim_-_Single_Fan_Panel_v2.0.stl
138 Ko · 3 784 downloads
-
stlITX_Stacker_Slim_-_Universal_Corner_v2.0.stl
26 Ko · 3 787 downloads
-
stlITX_Stacker_Slim_-_Back_Plate_Corner_v2.0.stl
29 Ko · 3 784 downloads
-
stlITX_Stacker_Standard_-_Universal_Corner_v2.0.stl
25 Ko · 3 778 downloads
-
stlITX_Stacker_Standard_-_Back_Plate_Corner_v2.0.stl
27 Ko · 3 749 downloads
-
stlITX_Stacker_-_Flange_v2.0.stl
46 Ko · 3 774 downloads
-
stlITX_Stacker_-_Top_or_Bottom_v2.0.stl
106 Ko · 3 808 downloads
-
stlITX_Stacker_-_3.5in_Hard_Drive_Front_or_Back.stl
3 Ko · 3 747 downloads
-
stlITX_Stacker_-_3.5in_Hard_Drive_Corner.stl
24 Ko · 3 762 downloads
-
stlITX_Stacker_-_3.5in_Hard_Drive_Right.stl
62 Ko · 3 757 downloads
-
stlITX_Stacker_-_3.5in_Hard_Drive_Left.stl
63 Ko · 3 746 downloads
Description
This is a project I have been working on for some time. It is the original purpose for which I bought a 3D printer and is finally coming to fruition. This design will require onboard power or pico-PSU style power supplies, for now.
Project Goals:
Modularity - Inspired by Legos
Stackable - Each self-contained module can be stacked in a tower
Minimalistic - Small footprint, as little wasted inner space as possible
Print-ability - No supports, little waste, low warp risk
Marketability - Anyone interested?
There are two version to choose from:
The slim version is for Slim-ITX boards and does not allow space for hard drives.
The standard version should fit any ITX board and has space for two hard drives with the included bracket.
Future Plans:
I'd like to add modules to hold various PSU and VGA cards. This will enable this case to be used for a gaming or desktop style system. If anyone would like customization, please message me.
Additions:
3.5 inch Hard Drive Module (currently untested, 1/27/17)