Mini ITX Computer Case - Modular / Stackable
por Kurakuea
Ficheiros imprimíveis (24)
-
stlITX_Stacker_Slim_-_Front_Panel_with_Power_and_LED_v2.0.stl
23 Ko · 3 826 descargas
-
stlITX_Stacker_Standard_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 817 descargas
-
stlITX_Stacker_Standard_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 818 descargas
-
stlITX_Stacker_Slim_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 810 descargas
-
stlITX_Stacker_Slim_-_Vent_Panel_v2.0.stl
160 Ko · 3 807 descargas
-
stlITX_Stacker_-_MB_Tab_Lock_v1.0.stl
22 Ko · 3 802 descargas
-
stlITX_Stacker_Standard_-_Hard_Drive_Bracket_v1.0.stl
300 Ko · 3 836 descargas
-
stlITX_Stacker_Standard_-_Vent_Panel_v2.0.stl
189 Ko · 3 794 descargas
-
stlITX_Stacker_Standard_-_Dual_Fan_Panel_v2.0.stl
215 Ko · 3 793 descargas
-
stlITX_Stacker_Slim_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 784 descargas
-
stlITX_Stacker_Slim_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 784 descargas
-
stlITX_Stacker_Standard_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 794 descargas
-
stlITX_Stacker_Standard_-_Front_Panel_with_Power_v2.0.stl
17 Ko · 3 791 descargas
-
stlITX_Stacker_Slim_-_Single_Fan_Panel_v2.0.stl
138 Ko · 3 784 descargas
-
stlITX_Stacker_Slim_-_Universal_Corner_v2.0.stl
26 Ko · 3 787 descargas
-
stlITX_Stacker_Slim_-_Back_Plate_Corner_v2.0.stl
29 Ko · 3 784 descargas
-
stlITX_Stacker_Standard_-_Universal_Corner_v2.0.stl
25 Ko · 3 778 descargas
-
stlITX_Stacker_Standard_-_Back_Plate_Corner_v2.0.stl
27 Ko · 3 749 descargas
-
stlITX_Stacker_-_Flange_v2.0.stl
46 Ko · 3 774 descargas
-
stlITX_Stacker_-_Top_or_Bottom_v2.0.stl
106 Ko · 3 808 descargas
-
stlITX_Stacker_-_3.5in_Hard_Drive_Front_or_Back.stl
3 Ko · 3 747 descargas
-
stlITX_Stacker_-_3.5in_Hard_Drive_Corner.stl
24 Ko · 3 762 descargas
-
stlITX_Stacker_-_3.5in_Hard_Drive_Right.stl
62 Ko · 3 757 descargas
-
stlITX_Stacker_-_3.5in_Hard_Drive_Left.stl
63 Ko · 3 746 descargas
Descrição
This is a project I have been working on for some time. It is the original purpose for which I bought a 3D printer and is finally coming to fruition. This design will require onboard power or pico-PSU style power supplies, for now.
Project Goals:
Modularity - Inspired by Legos
Stackable - Each self-contained module can be stacked in a tower
Minimalistic - Small footprint, as little wasted inner space as possible
Print-ability - No supports, little waste, low warp risk
Marketability - Anyone interested?
There are two version to choose from:
The slim version is for Slim-ITX boards and does not allow space for hard drives.
The standard version should fit any ITX board and has space for two hard drives with the included bracket.
Future Plans:
I'd like to add modules to hold various PSU and VGA cards. This will enable this case to be used for a gaming or desktop style system. If anyone would like customization, please message me.
Additions:
3.5 inch Hard Drive Module (currently untested, 1/27/17)