Mini ITX Computer Case - Modular / Stackable
di Kurakuea
File stampabili (24)
-
stlITX_Stacker_Slim_-_Front_Panel_with_Power_and_LED_v2.0.stl
23 Ko · 3 826 download
-
stlITX_Stacker_Standard_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 817 download
-
stlITX_Stacker_Standard_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 818 download
-
stlITX_Stacker_Slim_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 810 download
-
stlITX_Stacker_Slim_-_Vent_Panel_v2.0.stl
160 Ko · 3 807 download
-
stlITX_Stacker_-_MB_Tab_Lock_v1.0.stl
22 Ko · 3 802 download
-
stlITX_Stacker_Standard_-_Hard_Drive_Bracket_v1.0.stl
300 Ko · 3 836 download
-
stlITX_Stacker_Standard_-_Vent_Panel_v2.0.stl
189 Ko · 3 794 download
-
stlITX_Stacker_Standard_-_Dual_Fan_Panel_v2.0.stl
215 Ko · 3 793 download
-
stlITX_Stacker_Slim_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 784 download
-
stlITX_Stacker_Slim_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 784 download
-
stlITX_Stacker_Standard_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 794 download
-
stlITX_Stacker_Standard_-_Front_Panel_with_Power_v2.0.stl
17 Ko · 3 791 download
-
stlITX_Stacker_Slim_-_Single_Fan_Panel_v2.0.stl
138 Ko · 3 784 download
-
stlITX_Stacker_Slim_-_Universal_Corner_v2.0.stl
26 Ko · 3 787 download
-
stlITX_Stacker_Slim_-_Back_Plate_Corner_v2.0.stl
29 Ko · 3 784 download
-
stlITX_Stacker_Standard_-_Universal_Corner_v2.0.stl
25 Ko · 3 778 download
-
stlITX_Stacker_Standard_-_Back_Plate_Corner_v2.0.stl
27 Ko · 3 749 download
-
stlITX_Stacker_-_Flange_v2.0.stl
46 Ko · 3 774 download
-
stlITX_Stacker_-_Top_or_Bottom_v2.0.stl
106 Ko · 3 808 download
-
stlITX_Stacker_-_3.5in_Hard_Drive_Front_or_Back.stl
3 Ko · 3 747 download
-
stlITX_Stacker_-_3.5in_Hard_Drive_Corner.stl
24 Ko · 3 762 download
-
stlITX_Stacker_-_3.5in_Hard_Drive_Right.stl
62 Ko · 3 757 download
-
stlITX_Stacker_-_3.5in_Hard_Drive_Left.stl
63 Ko · 3 746 download
Descrizione
This is a project I have been working on for some time. It is the original purpose for which I bought a 3D printer and is finally coming to fruition. This design will require onboard power or pico-PSU style power supplies, for now.
Project Goals:
Modularity - Inspired by Legos
Stackable - Each self-contained module can be stacked in a tower
Minimalistic - Small footprint, as little wasted inner space as possible
Print-ability - No supports, little waste, low warp risk
Marketability - Anyone interested?
There are two version to choose from:
The slim version is for Slim-ITX boards and does not allow space for hard drives.
The standard version should fit any ITX board and has space for two hard drives with the included bracket.
Future Plans:
I'd like to add modules to hold various PSU and VGA cards. This will enable this case to be used for a gaming or desktop style system. If anyone would like customization, please message me.
Additions:
3.5 inch Hard Drive Module (currently untested, 1/27/17)