Pegboard hook system
by reeseallen
Printable files (102)
-
stlPegboard-H-1x_loops_10_mm_wide_base.STL
39 Ko · 18 252 downloads
-
stlPegboard-H-1x_loops_15_mm.STL
48 Ko · 18 160 downloads
-
stlPegboard-H-1x_loops_20_mm.STL
53 Ko · 18 129 downloads
-
stlPegboard-H-1x_loops_20_mm_wide_base.STL
51 Ko · 18 122 downloads
-
stlPegboard-H-3x_loops_15_mm.STL
101 Ko · 18 156 downloads
-
stlPegboard-H-1x_loops_25_mm_wide_base.STL
54 Ko · 18 096 downloads
-
stlPegboard-H-1x_loops_30_mm.STL
56 Ko · 18 092 downloads
-
stlPegboard-H-1x_loops_15_mm_wide_base.STL
46 Ko · 18 090 downloads
-
stlPegboard-H-5x_loops_20_mm.STL
153 Ko · 18 117 downloads
-
stlPegboard-H-1x_loops_10_mm.STL
42 Ko · 18 064 downloads
-
stlPegboard-H-5x_loops_10_mm.STL
123 Ko · 18 080 downloads
-
stlPegboard-H-Default.STL
26 Ko · 18 069 downloads
-
stlPegboard-H-3x_loops_20_mm.STL
112 Ko · 18 036 downloads
-
stlPegboard-H-5x_loops_15_mm.STL
139 Ko · 18 044 downloads
-
stlPegboard-H-3x_loops_25_mm.STL
119 Ko · 18 024 downloads
-
stlPegboard-H-7x_loops_25_mm.STL
206 Ko · 18 017 downloads
-
stlPegboard-H-Double_brace_2in.STL
36 Ko · 18 021 downloads
-
stlPegboard-H-7x_loops_10_mm.STL
164 Ko · 17 999 downloads
-
stlPegboard-H-7x_loops_20_mm.STL
193 Ko · 17 988 downloads
-
stlPegboard-H-7x_loops_15_mm.STL
176 Ko · 17 986 downloads
-
stlPegboard-H-Double_brace_2in_with_pegs.STL
187 Ko · 17 982 downloads
-
stlPegboard-H-Double_brace_6in.STL
35 Ko · 17 963 downloads
-
stlPegboard-H-3x_loops_10_mm.STL
86 Ko · 17 953 downloads
-
stlPegboard-H-1x_loops_25_mm.STL
56 Ko · 17 934 downloads
-
stlPegboard-H-Lateral_brace.STL
26 Ko · 17 955 downloads
-
stlPegboard-H-Double_brace_3in.STL
35 Ko · 17 943 downloads
-
stlPegboard-H-Double_brace_3in_with_pegs.STL
217 Ko · 17 927 downloads
-
stlPegboard-H-Open_loop_12x6_mm_wide_base.STL
51 Ko · 17 905 downloads
-
stlPegboard-H-Double_brace_6in_with_pegs.STL
302 Ko · 17 912 downloads
-
stlPegboard-H-Open_loop_12x6_mm.STL
53 Ko · 17 912 downloads
-
stlPegboard-H-Double_brace_5in.STL
35 Ko · 17 906 downloads
-
stlPegboard-H-Open_loop_12x8_mm.STL
50 Ko · 17 883 downloads
-
stlPegboard-H-Double_brace_7in.STL
35 Ko · 17 860 downloads
-
stlPegboard-H-5x_loops_25_mm.STL
164 Ko · 17 864 downloads
-
stlPegboard-H-Double_brace_7in_with_pegs.STL
323 Ko · 17 854 downloads
-
stlPegboard-H-Double_brace_4in.STL
35 Ko · 17 855 downloads
-
stlPegboard-H-Open_loop_15x12_mm_wide_base.STL
49 Ko · 17 843 downloads
-
stlPegboard-H-Open_loop_12x9_mm_wide_base.STL
47 Ko · 17 811 downloads
-
stlPegboard-H-Open_loop_15x8_mm.STL
57 Ko · 17 819 downloads
-
stlPegboard-H-Open_loop_12x9_mm.STL
50 Ko · 17 807 downloads
-
stlPegboard-H-Double_brace_4in_with_pegs.STL
249 Ko · 17 811 downloads
-
stlPegboard-H-Open_loop_15x10_mm_wide_base.STL
52 Ko · 17 798 downloads
-
stlPegboard-H-Lateral_brace_wide_base.STL
23 Ko · 17 796 downloads
-
stlPegboard-H-Open_loop_15x10_mm.STL
54 Ko · 17 774 downloads
-
stlPegboard-H-Open_loop_20x10_mm_wide_base.STL
59 Ko · 17 764 downloads
-
stlPegboard-H-Open_loop_15x12_mm.STL
52 Ko · 17 755 downloads
-
stlPegboard-H-Double_brace_5in_with_pegs.STL
273 Ko · 17 784 downloads
-
stlPegboard-H-Open_loop_20x10_mm.STL
62 Ko · 17 752 downloads
-
stlPegboard-H-Open_loop_15x8_mm_wide_base.STL
55 Ko · 17 747 downloads
-
stlPegboard-H-Open_loop_25x12_mm.STL
65 Ko · 17 730 downloads
-
stlPegboard-H-Open_loop_25x16_mm_wide_base.STL
60 Ko · 17 729 downloads
-
stlPegboard-H-Open_loop_20x14_mm.STL
58 Ko · 17 709 downloads
-
stlPegboard-H-Open_loop_20x14_mm_wide_base.STL
56 Ko · 17 705 downloads
-
stlPegboard-H-Open_loop_25x14_mm_wide_base.STL
62 Ko · 17 688 downloads
-
stlPegboard-H-Open_loop_20x12_mm_wide_base.STL
58 Ko · 17 676 downloads
-
stlPegboard-H-Open_loop_25x16_mm.STL
63 Ko · 17 691 downloads
-
stlPegboard-V-Curved_20x4x2.5.STL
99 Ko · 17 808 downloads
-
stlPegboard-H-Open_loop_20x12_mm.STL
60 Ko · 17 672 downloads
-
stlPegboard-V-Curved_25x5x2.5.STL
98 Ko · 17 821 downloads
-
stlPegboard-H-Open_loop_25x14_mm.STL
64 Ko · 17 652 downloads
-
stlPegboard-V-Curved_20x4x4.5.STL
99 Ko · 17 790 downloads
-
stlPegboard-V-Curved_20x4x3.5.STL
99 Ko · 17 757 downloads
-
stlPegboard-V-Curved_30x7.5x3.5.STL
97 Ko · 17 766 downloads
-
stlPegboard-H-Open_loop_25x12_mm_wide_base.STL
64 Ko · 17 642 downloads
-
stlPegboard-V-Curved_30x7.5x2.5.STL
97 Ko · 17 732 downloads
-
stlPegboard-V-Curved_25x5x4.5.STL
98 Ko · 17 723 downloads
-
stlPegboard-V-Curved_35x10x3.5.STL
91 Ko · 17 677 downloads
-
stlPegboard-V-Curved_40x12x3.5.STL
90 Ko · 17 690 downloads
-
stlPegboard-H-Open_loop_12x8_mm_wide_base.STL
48 Ko · 17 597 downloads
-
stlPegboard-V-Curved_40x12x4.5.STL
90 Ko · 17 678 downloads
-
stlPegboard-V-Hooked_20x3.5.STL
102 Ko · 17 694 downloads
-
stlPegboard-V-Curved_35x10x4.5.STL
91 Ko · 17 639 downloads
-
stlPegboard-V-Hooked_20x4.5.STL
103 Ko · 17 648 downloads
-
stlPegboard-V-Curved_30x7.5x4.5.STL
97 Ko · 17 598 downloads
-
stlPegboard-V-Hooked_20x2.5.STL
102 Ko · 17 617 downloads
-
stlPegboard-V-Hooked_25x3.5.STL
100 Ko · 17 619 downloads
-
stlPegboard-V-Drill_holder_rear.STL
84 Ko · 17 652 downloads
-
stlPegboard-V-Drill_holder_front.STL
88 Ko · 17 626 downloads
-
stlPegboard-V-Hooked_30x3.5.STL
98 Ko · 17 571 downloads
-
stlPegboard-V-Hooked_30x4.5.STL
98 Ko · 17 568 downloads
-
stlPegboard-V-Curved_25x5x3.5.STL
98 Ko · 17 589 downloads
-
stlPegboard-V-Hooked_40x3.5.STL
89 Ko · 17 603 downloads
-
stlPegboard-V-Long_hook_100.STL
92 Ko · 17 558 downloads
-
stlPegboard-V-Long_hook_75.STL
98 Ko · 17 565 downloads
-
stlPegboard-V-Hooked_25x4.5.STL
100 Ko · 17 554 downloads
-
stlPegboard-V-Hooked_40x4.5.STL
89 Ko · 17 573 downloads
-
stlPegboard-V-Long_hook_125.STL
88 Ko · 17 537 downloads
-
stlPegboard-V-Hooked_30x2.5.STL
97 Ko · 17 518 downloads
-
stlPegboard-V-Default.STL
280 Ko · 17 503 downloads
-
stlPegboard-V-Hooked_25x2.5.STL
99 Ko · 17 518 downloads
-
stlPegboard-V-Long_hook_150.STL
90 Ko · 17 506 downloads
-
stlPegboard-V-Hooked_35x4.5.STL
96 Ko · 17 527 downloads
-
stlPegboard-V-Hooked_35x3.5.STL
96 Ko · 17 510 downloads
-
stlPegboard-V-Rack_support_70.STL
149 Ko · 17 423 downloads
-
stlPegboard-V-Rack_support_90.STL
188 Ko · 17 411 downloads
-
stlPegboard-V-Rack_support_40.STL
107 Ko · 17 436 downloads
-
stlPegboard-V-Rack_support_single.STL
119 Ko · 17 447 downloads
-
stlPegboard-V-Rack_support_30.STL
118 Ko · 17 524 downloads
-
stlPegboard-V-Rack_support_50.STL
102 Ko · 17 398 downloads
-
stlPegboard-V-Rack_support_60.STL
148 Ko · 17 381 downloads
-
stlPegboard-V-Rack_support_80.STL
195 Ko · 17 369 downloads
-
stlPegboard-V-Rack_support_100.STL
183 Ko · 17 382 downloads
Description
This system is designed to work with pegboard made from wood or pressboard about 1/8" thick, with 1/4" holes on 1" spacing. When your print settings are tuned, the hooks should snap into the pegboard snugly with very little slop. If you are using a thin metal pegboard panel, or a thicker wooden pegboard, the fit may not be as good.
My favorite material to print with is PLA, and my favorite brand is eSun. For over 10 years, going back to 2015, I have almost exclusively used eSun when printing with PLA, and I still happily recommend it: https://amzn.to/3PuSGM7
This collection includes:
- One-piece curved hooks, based on an arc segment, in various lengths and thicknesses
- One-piece hooked hooks that are flat with a little retaining barb on the end, in various lengths and thicknesses
- Two-piece long hooks that are stabilized well with a lateral brace piece, in several lengths
- Arrays of 1, 3, 5, and 7 loops in four diameters. Choose a loop count and upper and lower diameter, print two loop arrays, then attach a pair of rack supports to them to create a rack of screwdriver holders. A single rack support is also provided, in case you just want one loop without a second one below it.
- Open loops for round-handled tools such as ratchet wrenches and hammers, which let you snap the tool into place.
- A drill holder system designed to hold a cordless drill. Print one drill holder front, one drill holder rear, and one double brace 5in with pegs. You can also brace it with two lateral braces, but you may have trouble with stability, as the drill is pretty heavy.
- A model showing only the hook and peg that fit into the pegboard so that you can design whatever hook shape you want using your CAD software of choice, Pegboard-V-Default.STL
There are V and H models included in this collection, which stand for Vertical and Horizontal. The hooks themselves are all V parts. Some are equipped with a rectangular notch, which accepts a mating H part. The loops are H parts that require a V-rack support in order to attach them to the pegboard.
Note: The double brace with pegs parts are only designed to work with the drill holder hooks as of this writing. If you try to assemble two long hooks with a double brace with pegs part, you will find that the double brace's pegs don't line up with any holes. However, two long hooks plus a pegless double brace works great.
Printing tips:
- Adjust your print settings until the pegs fit snugly and the hooks feel firm, not loose and wobbly, after being installed. Get this dialed in before you go printing 20 hooks at once.
- Do not change the scaling.
- Increasing your extrusion multiplier (try 1.05 or 1.1) is one way to make the part "swell" and give it a tighter fit.
Note: links posted here may be Amazon Affiliate links, which earn me a very small commission when someone uses them, at no cost to the buyer.