Pegboard hook system
por reeseallen
Ficheiros imprimíveis (102)
-
stlPegboard-H-1x_loops_10_mm_wide_base.STL
39 Ko · 18 252 descargas
-
stlPegboard-H-1x_loops_15_mm.STL
48 Ko · 18 160 descargas
-
stlPegboard-H-1x_loops_20_mm.STL
53 Ko · 18 129 descargas
-
stlPegboard-H-1x_loops_20_mm_wide_base.STL
51 Ko · 18 122 descargas
-
stlPegboard-H-3x_loops_15_mm.STL
101 Ko · 18 156 descargas
-
stlPegboard-H-1x_loops_25_mm_wide_base.STL
54 Ko · 18 096 descargas
-
stlPegboard-H-1x_loops_30_mm.STL
56 Ko · 18 092 descargas
-
stlPegboard-H-1x_loops_15_mm_wide_base.STL
46 Ko · 18 090 descargas
-
stlPegboard-H-5x_loops_20_mm.STL
153 Ko · 18 117 descargas
-
stlPegboard-H-1x_loops_10_mm.STL
42 Ko · 18 064 descargas
-
stlPegboard-H-5x_loops_10_mm.STL
123 Ko · 18 080 descargas
-
stlPegboard-H-Default.STL
26 Ko · 18 069 descargas
-
stlPegboard-H-3x_loops_20_mm.STL
112 Ko · 18 036 descargas
-
stlPegboard-H-5x_loops_15_mm.STL
139 Ko · 18 044 descargas
-
stlPegboard-H-3x_loops_25_mm.STL
119 Ko · 18 024 descargas
-
stlPegboard-H-7x_loops_25_mm.STL
206 Ko · 18 017 descargas
-
stlPegboard-H-Double_brace_2in.STL
36 Ko · 18 021 descargas
-
stlPegboard-H-7x_loops_10_mm.STL
164 Ko · 17 999 descargas
-
stlPegboard-H-7x_loops_20_mm.STL
193 Ko · 17 988 descargas
-
stlPegboard-H-7x_loops_15_mm.STL
176 Ko · 17 986 descargas
-
stlPegboard-H-Double_brace_2in_with_pegs.STL
187 Ko · 17 982 descargas
-
stlPegboard-H-Double_brace_6in.STL
35 Ko · 17 963 descargas
-
stlPegboard-H-3x_loops_10_mm.STL
86 Ko · 17 953 descargas
-
stlPegboard-H-1x_loops_25_mm.STL
56 Ko · 17 934 descargas
-
stlPegboard-H-Lateral_brace.STL
26 Ko · 17 955 descargas
-
stlPegboard-H-Double_brace_3in.STL
35 Ko · 17 943 descargas
-
stlPegboard-H-Double_brace_3in_with_pegs.STL
217 Ko · 17 927 descargas
-
stlPegboard-H-Open_loop_12x6_mm_wide_base.STL
51 Ko · 17 905 descargas
-
stlPegboard-H-Double_brace_6in_with_pegs.STL
302 Ko · 17 912 descargas
-
stlPegboard-H-Open_loop_12x6_mm.STL
53 Ko · 17 912 descargas
-
stlPegboard-H-Double_brace_5in.STL
35 Ko · 17 906 descargas
-
stlPegboard-H-Open_loop_12x8_mm.STL
50 Ko · 17 883 descargas
-
stlPegboard-H-Double_brace_7in.STL
35 Ko · 17 860 descargas
-
stlPegboard-H-5x_loops_25_mm.STL
164 Ko · 17 864 descargas
-
stlPegboard-H-Double_brace_7in_with_pegs.STL
323 Ko · 17 854 descargas
-
stlPegboard-H-Double_brace_4in.STL
35 Ko · 17 855 descargas
-
stlPegboard-H-Open_loop_15x12_mm_wide_base.STL
49 Ko · 17 843 descargas
-
stlPegboard-H-Open_loop_12x9_mm_wide_base.STL
47 Ko · 17 811 descargas
-
stlPegboard-H-Open_loop_15x8_mm.STL
57 Ko · 17 819 descargas
-
stlPegboard-H-Open_loop_12x9_mm.STL
50 Ko · 17 807 descargas
-
stlPegboard-H-Double_brace_4in_with_pegs.STL
249 Ko · 17 811 descargas
-
stlPegboard-H-Open_loop_15x10_mm_wide_base.STL
52 Ko · 17 798 descargas
-
stlPegboard-H-Lateral_brace_wide_base.STL
23 Ko · 17 796 descargas
-
stlPegboard-H-Open_loop_15x10_mm.STL
54 Ko · 17 774 descargas
-
stlPegboard-H-Open_loop_20x10_mm_wide_base.STL
59 Ko · 17 764 descargas
-
stlPegboard-H-Open_loop_15x12_mm.STL
52 Ko · 17 755 descargas
-
stlPegboard-H-Double_brace_5in_with_pegs.STL
273 Ko · 17 784 descargas
-
stlPegboard-H-Open_loop_20x10_mm.STL
62 Ko · 17 752 descargas
-
stlPegboard-H-Open_loop_15x8_mm_wide_base.STL
55 Ko · 17 747 descargas
-
stlPegboard-H-Open_loop_25x12_mm.STL
65 Ko · 17 730 descargas
-
stlPegboard-H-Open_loop_25x16_mm_wide_base.STL
60 Ko · 17 729 descargas
-
stlPegboard-H-Open_loop_20x14_mm.STL
58 Ko · 17 709 descargas
-
stlPegboard-H-Open_loop_20x14_mm_wide_base.STL
56 Ko · 17 705 descargas
-
stlPegboard-H-Open_loop_25x14_mm_wide_base.STL
62 Ko · 17 688 descargas
-
stlPegboard-H-Open_loop_20x12_mm_wide_base.STL
58 Ko · 17 676 descargas
-
stlPegboard-H-Open_loop_25x16_mm.STL
63 Ko · 17 691 descargas
-
stlPegboard-V-Curved_20x4x2.5.STL
99 Ko · 17 808 descargas
-
stlPegboard-H-Open_loop_20x12_mm.STL
60 Ko · 17 672 descargas
-
stlPegboard-V-Curved_25x5x2.5.STL
98 Ko · 17 821 descargas
-
stlPegboard-H-Open_loop_25x14_mm.STL
64 Ko · 17 652 descargas
-
stlPegboard-V-Curved_20x4x4.5.STL
99 Ko · 17 790 descargas
-
stlPegboard-V-Curved_20x4x3.5.STL
99 Ko · 17 757 descargas
-
stlPegboard-V-Curved_30x7.5x3.5.STL
97 Ko · 17 766 descargas
-
stlPegboard-H-Open_loop_25x12_mm_wide_base.STL
64 Ko · 17 642 descargas
-
stlPegboard-V-Curved_30x7.5x2.5.STL
97 Ko · 17 732 descargas
-
stlPegboard-V-Curved_25x5x4.5.STL
98 Ko · 17 723 descargas
-
stlPegboard-V-Curved_35x10x3.5.STL
91 Ko · 17 677 descargas
-
stlPegboard-V-Curved_40x12x3.5.STL
90 Ko · 17 690 descargas
-
stlPegboard-H-Open_loop_12x8_mm_wide_base.STL
48 Ko · 17 597 descargas
-
stlPegboard-V-Curved_40x12x4.5.STL
90 Ko · 17 678 descargas
-
stlPegboard-V-Hooked_20x3.5.STL
102 Ko · 17 694 descargas
-
stlPegboard-V-Curved_35x10x4.5.STL
91 Ko · 17 639 descargas
-
stlPegboard-V-Hooked_20x4.5.STL
103 Ko · 17 648 descargas
-
stlPegboard-V-Curved_30x7.5x4.5.STL
97 Ko · 17 598 descargas
-
stlPegboard-V-Hooked_20x2.5.STL
102 Ko · 17 617 descargas
-
stlPegboard-V-Hooked_25x3.5.STL
100 Ko · 17 619 descargas
-
stlPegboard-V-Drill_holder_rear.STL
84 Ko · 17 652 descargas
-
stlPegboard-V-Drill_holder_front.STL
88 Ko · 17 626 descargas
-
stlPegboard-V-Hooked_30x3.5.STL
98 Ko · 17 571 descargas
-
stlPegboard-V-Hooked_30x4.5.STL
98 Ko · 17 568 descargas
-
stlPegboard-V-Curved_25x5x3.5.STL
98 Ko · 17 589 descargas
-
stlPegboard-V-Hooked_40x3.5.STL
89 Ko · 17 603 descargas
-
stlPegboard-V-Long_hook_100.STL
92 Ko · 17 558 descargas
-
stlPegboard-V-Long_hook_75.STL
98 Ko · 17 565 descargas
-
stlPegboard-V-Hooked_25x4.5.STL
100 Ko · 17 554 descargas
-
stlPegboard-V-Hooked_40x4.5.STL
89 Ko · 17 573 descargas
-
stlPegboard-V-Long_hook_125.STL
88 Ko · 17 537 descargas
-
stlPegboard-V-Hooked_30x2.5.STL
97 Ko · 17 518 descargas
-
stlPegboard-V-Default.STL
280 Ko · 17 503 descargas
-
stlPegboard-V-Hooked_25x2.5.STL
99 Ko · 17 518 descargas
-
stlPegboard-V-Long_hook_150.STL
90 Ko · 17 506 descargas
-
stlPegboard-V-Hooked_35x4.5.STL
96 Ko · 17 527 descargas
-
stlPegboard-V-Hooked_35x3.5.STL
96 Ko · 17 510 descargas
-
stlPegboard-V-Rack_support_70.STL
149 Ko · 17 423 descargas
-
stlPegboard-V-Rack_support_90.STL
188 Ko · 17 411 descargas
-
stlPegboard-V-Rack_support_40.STL
107 Ko · 17 436 descargas
-
stlPegboard-V-Rack_support_single.STL
119 Ko · 17 447 descargas
-
stlPegboard-V-Rack_support_30.STL
118 Ko · 17 524 descargas
-
stlPegboard-V-Rack_support_50.STL
102 Ko · 17 398 descargas
-
stlPegboard-V-Rack_support_60.STL
148 Ko · 17 381 descargas
-
stlPegboard-V-Rack_support_80.STL
195 Ko · 17 369 descargas
-
stlPegboard-V-Rack_support_100.STL
183 Ko · 17 382 descargas
Descrição
This system is designed to work with pegboard made from wood or pressboard about 1/8" thick, with 1/4" holes on 1" spacing. When your print settings are tuned, the hooks should snap into the pegboard snugly with very little slop. If you are using a thin metal pegboard panel, or a thicker wooden pegboard, the fit may not be as good.
My favorite material to print with is PLA, and my favorite brand is eSun. For over 10 years, going back to 2015, I have almost exclusively used eSun when printing with PLA, and I still happily recommend it: https://amzn.to/3PuSGM7
This collection includes:
- One-piece curved hooks, based on an arc segment, in various lengths and thicknesses
- One-piece hooked hooks that are flat with a little retaining barb on the end, in various lengths and thicknesses
- Two-piece long hooks that are stabilized well with a lateral brace piece, in several lengths
- Arrays of 1, 3, 5, and 7 loops in four diameters. Choose a loop count and upper and lower diameter, print two loop arrays, then attach a pair of rack supports to them to create a rack of screwdriver holders. A single rack support is also provided, in case you just want one loop without a second one below it.
- Open loops for round-handled tools such as ratchet wrenches and hammers, which let you snap the tool into place.
- A drill holder system designed to hold a cordless drill. Print one drill holder front, one drill holder rear, and one double brace 5in with pegs. You can also brace it with two lateral braces, but you may have trouble with stability, as the drill is pretty heavy.
- A model showing only the hook and peg that fit into the pegboard so that you can design whatever hook shape you want using your CAD software of choice, Pegboard-V-Default.STL
There are V and H models included in this collection, which stand for Vertical and Horizontal. The hooks themselves are all V parts. Some are equipped with a rectangular notch, which accepts a mating H part. The loops are H parts that require a V-rack support in order to attach them to the pegboard.
Note: The double brace with pegs parts are only designed to work with the drill holder hooks as of this writing. If you try to assemble two long hooks with a double brace with pegs part, you will find that the double brace's pegs don't line up with any holes. However, two long hooks plus a pegless double brace works great.
Printing tips:
- Adjust your print settings until the pegs fit snugly and the hooks feel firm, not loose and wobbly, after being installed. Get this dialed in before you go printing 20 hooks at once.
- Do not change the scaling.
- Increasing your extrusion multiplier (try 1.05 or 1.1) is one way to make the part "swell" and give it a tighter fit.
Note: links posted here may be Amazon Affiliate links, which earn me a very small commission when someone uses them, at no cost to the buyer.