Turboprop Engine
by konchan77
Printable files (72)
-
stlAccy-Parts-SM-Base101.stl
45 Ko · 73 328 downloads
-
stlOil-Cooler-Inlet201.stl
197 Ko · 73 117 downloads
-
stlAccy-Parts-FMU101.stl
71 Ko · 73 158 downloads
-
stlComp-Inter-Case01.stl
1.8 Mo · 73 130 downloads
-
stlReduction-Gear03.stl
275 Ko · 73 072 downloads
-
stlInterm-Case03a.stl
282 Ko · 73 073 downloads
-
stlTurbine-Case01b.stl
210 Ko · 73 087 downloads
-
stlTurbine-HP-NGV01.stl
225 Ko · 73 028 downloads
-
stlImp-Coupling01.stl
133 Ko · 73 009 downloads
-
stlShaft-Coupling03.stl
71 Ko · 72 974 downloads
-
stlInterm-Case02a.stl
254 Ko · 72 983 downloads
-
stlOil-Cooler101.stl
82 Ko · 72 963 downloads
-
stlTurbine-Shaft-Spacer02.stl
29 Ko · 72 972 downloads
-
stlInterm-Case-Cut01.stl
420 Ko · 72 943 downloads
-
stlComp-LP-Diffuser01.stl
68 Ko · 72 976 downloads
-
stlAccy-Parts-SM101.stl
61 Ko · 72 909 downloads
-
stlTurbine-IP-Rotor01.stl
489 Ko · 72 921 downloads
-
stlReduction-Gear-Flg02.stl
326 Ko · 72 894 downloads
-
stlTurbine-IP-NGV01.stl
343 Ko · 72 910 downloads
-
stlAccy-Parts-RH-Base101.stl
113 Ko · 72 852 downloads
-
stlTurbine-Case01a.stl
465 Ko · 72 902 downloads
-
stlReduction-Panel01a.stl
11 Ko · 72 858 downloads
-
stlTurbine-LP-Rotor01.stl
465 Ko · 72 864 downloads
-
stlCC-Aircase03.stl
333 Ko · 72 831 downloads
-
stlCC-Aircase04.stl
453 Ko · 72 801 downloads
-
stlAccy-Parts-SM102.stl
26 Ko · 72 822 downloads
-
stlTurbine-LP-NGV01.stl
429 Ko · 72 805 downloads
-
stlAir-Intake-Cover101.stl
219 Ko · 72 847 downloads
-
stlShaft-Brg-Spt02.stl
26 Ko · 72 804 downloads
-
stlShaft-Spacer201.stl
30 Ko · 72 758 downloads
-
stlReduction-Panel03.stl
61 Ko · 72 800 downloads
-
stlStand102.stl
15 Ko · 72 758 downloads
-
stlTurbine-HP-Rotor01.stl
471 Ko · 72 759 downloads
-
stlAir-Intake-Fairing101.stl
349 Ko · 72 770 downloads
-
stlReduction-Gear-Flg01.stl
103 Ko · 72 752 downloads
-
stlOutlet-Elbow02.stl
62 Ko · 72 751 downloads
-
stlShaft-Coupling01.stl
26 Ko · 72 726 downloads
-
stlOil-Cooler-Outlet101.stl
362 Ko · 72 738 downloads
-
stlInterm-Case-Cut02.stl
91 Ko · 72 725 downloads
-
stlReduction-Gear01b.stl
350 Ko · 72 763 downloads
-
stlStand101.stl
50 Ko · 72 695 downloads
-
stlAccy-Parts-PCU101.stl
114 Ko · 72 689 downloads
-
stlReduction-Panel02.stl
88 Ko · 72 707 downloads
-
stlReduction-Panel01.stl
133 Ko · 72 696 downloads
-
stlAir-Intake-Case101.stl
1.7 Mo · 72 724 downloads
-
stlImpeller-HP02.stl
666 Ko · 72 778 downloads
-
stlReduction-Gear02.stl
568 Ko · 72 710 downloads
-
stlCC-Flame-Tube03x95m.stl
582 Ko · 72 657 downloads
-
stlComp-HP-Diffuser01.stl
70 Ko · 72 679 downloads
-
stlOil-Cooler102.stl
431 Ko · 72 633 downloads
-
stlComp-Outlet-Case101.stl
1.2 Mo · 72 646 downloads
-
stlTurbine-Shaft01.stl
505 Ko · 72 624 downloads
-
stlReduction-Gear01a.stl
528 Ko · 72 636 downloads
-
stlAir-Intake-Cowling02.stl
162 Ko · 72 650 downloads
-
stlShaft-Brg-Spt01.stl
31 Ko · 72 600 downloads
-
stlShaft-Spacer04.stl
34 Ko · 72 618 downloads
-
stlOil-Press-Tx01.stl
209 Ko · 72 585 downloads
-
stlAir-Intake-Cowling301.stl
1.5 Mo · 72 617 downloads
-
stlRed-Prop-Shaft101.stl
298 Ko · 72 605 downloads
-
stlComp-IGV-Case02.stl
510 Ko · 72 585 downloads
-
stlCC-Aircase01.stl
721 Ko · 72 587 downloads
-
stlComp-Frt-Case02.stl
1.2 Mo · 72 559 downloads
-
stlCC-Flame-Tube02x95.stl
678 Ko · 72 564 downloads
-
stlExhaust-Duct101.stl
729 Ko · 72 549 downloads
-
stlComp-IGV-Case01.stl
602 Ko · 72 612 downloads
-
stlImpeller-LP02.stl
801 Ko · 72 659 downloads
-
stlCC-Flame-Tube01x95.stl
1.1 Mo · 72 563 downloads
-
stlExhaust-Duct102.stl
1 Mo · 72 560 downloads
-
stlOutlet-Elbow-Assy101.stl
3.8 Mo · 72 596 downloads
-
stlReduction-Panel03f.stl
116 Ko · 69 301 downloads
-
stlMount-Foot101.stl
194 Ko · 60 691 downloads
-
stlShaft-Coupling101.stl
51 Ko · 4 903 downloads
Description
This is a cutaway model of Turboprop Engine having following features for educational purpose.
Features are:
(1) Centrifugal (Impeller type) compressor
(2) Can type Combustion Chamber
(3) Axial Flow Turbine
(4) Reduction gears and propeller shaft
(5) Air inlet cowling with Oil Cooler Air Passage
Download files includes;
-files: STL Files
-images: STL File Figure and Index Picture for assembly Aid
Purchase Parts Information;
-Bearings
WBC6-12ZZ (6 x 12 x 4) 6ea - Assemble to outer holes of each Panel
F686ZZ(6 x 1 3x 5) 2ea - Assemble to center of each Panel
689ZZ (9 x 17 x 5) 2ea - For LP and HP Impeller
6900ZZ (10 x 22 x 6) 2ea - For Prop-Shaft, Turbine Shaft
-Aluminum Tubes
9mm dia x Appox. 70mm - as Compressor Rotor Shaft (Make slots both ends)
6mm dia x Appox. 100mm - as Turbine to Compressor Coupling Shaft
-Screws
Micro screws M1.4x3L - Appox. 70 ea - Direct screw-in to 1 mm dia hole (No nut),
Head side flange hole is 1.5 mm dia.
Screws M2 x 20L - 1ea - M2 Tap is used - Starter associate parts
Screws M2 x 10L - Appox. 12ea - M2 Tap is used - Red. Gear Panels associate parts and IGV
Screws M2 x 6L - Appox. 4ea - M2 Tap is used - Diffusers and Turb. Shaft Coupling
Assembly Points
- Rotors, Gear Train Set and Casings can be assembled and adjusted separately.
- Combustion Air Casing is slid to the outlet elbow assembly until aft end clears from the turbine case its bore at first. Then slide back to bore. Gluing is optional.
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
Total Net Print Time: Approx. 50 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted.
[Update] 2018.8.13
This is the original design for the followings. Please refer them.
- Mod Parts : https://www.thingiverse.com/thing:2416610
- Mod Parts2 : https://www.thingiverse.com/thing:2747907
- Mod Parts3 : https://www.thingiverse.com/thing:2792220
[Update] 2018.8.22
Add "Assembly Charts" (pdf format) and figures are added to assist for assembly.
[Update] 2018.9.4
Parts List including Mod-Parts and Identification of rotaing parts.
[Update] 20180913
Add the optional part "Reduction-Panel03f" for "Reduction-Panel03"
[Update] 20181025
Add "Mount-Foot101" called in "Assembly Charts"
[Update] 20190907
I have prepared the detailed Assembly Manual as an option for those who want to build this engine with a small amount of money. Please browse if you are interested in this.
https://cults3d.com/en/3d-model/tool/turboprop-engine-assembly-manual-option
[Update]20200506
"Flange-Screw01" figure added about M1.4 Screw.
[Update]20201018
Add "Shaft-Coupling 101.stl" having thicker wall.