Turboprop Engine
par konchan77
Fichiers imprimables (72)
-
stlAccy-Parts-SM-Base101.stl
45 Ko · 73 285 téléchargements
-
stlOil-Cooler-Inlet201.stl
197 Ko · 73 073 téléchargements
-
stlAccy-Parts-FMU101.stl
71 Ko · 73 115 téléchargements
-
stlComp-Inter-Case01.stl
1.8 Mo · 73 088 téléchargements
-
stlReduction-Gear03.stl
275 Ko · 73 030 téléchargements
-
stlInterm-Case03a.stl
282 Ko · 73 031 téléchargements
-
stlTurbine-Case01b.stl
210 Ko · 73 044 téléchargements
-
stlTurbine-HP-NGV01.stl
225 Ko · 72 986 téléchargements
-
stlImp-Coupling01.stl
133 Ko · 72 965 téléchargements
-
stlShaft-Coupling03.stl
71 Ko · 72 929 téléchargements
-
stlInterm-Case02a.stl
254 Ko · 72 941 téléchargements
-
stlOil-Cooler101.stl
82 Ko · 72 920 téléchargements
-
stlTurbine-Shaft-Spacer02.stl
29 Ko · 72 927 téléchargements
-
stlInterm-Case-Cut01.stl
420 Ko · 72 899 téléchargements
-
stlComp-LP-Diffuser01.stl
68 Ko · 72 933 téléchargements
-
stlAccy-Parts-SM101.stl
61 Ko · 72 865 téléchargements
-
stlTurbine-IP-Rotor01.stl
489 Ko · 72 876 téléchargements
-
stlReduction-Gear-Flg02.stl
326 Ko · 72 850 téléchargements
-
stlTurbine-IP-NGV01.stl
343 Ko · 72 865 téléchargements
-
stlAccy-Parts-RH-Base101.stl
113 Ko · 72 809 téléchargements
-
stlTurbine-Case01a.stl
465 Ko · 72 860 téléchargements
-
stlReduction-Panel01a.stl
11 Ko · 72 816 téléchargements
-
stlTurbine-LP-Rotor01.stl
465 Ko · 72 822 téléchargements
-
stlCC-Aircase03.stl
333 Ko · 72 788 téléchargements
-
stlCC-Aircase04.stl
453 Ko · 72 760 téléchargements
-
stlAccy-Parts-SM102.stl
26 Ko · 72 780 téléchargements
-
stlTurbine-LP-NGV01.stl
429 Ko · 72 761 téléchargements
-
stlAir-Intake-Cover101.stl
219 Ko · 72 802 téléchargements
-
stlShaft-Brg-Spt02.stl
26 Ko · 72 761 téléchargements
-
stlShaft-Spacer201.stl
30 Ko · 72 716 téléchargements
-
stlReduction-Panel03.stl
61 Ko · 72 757 téléchargements
-
stlStand102.stl
15 Ko · 72 714 téléchargements
-
stlTurbine-HP-Rotor01.stl
471 Ko · 72 714 téléchargements
-
stlAir-Intake-Fairing101.stl
349 Ko · 72 727 téléchargements
-
stlReduction-Gear-Flg01.stl
103 Ko · 72 711 téléchargements
-
stlOutlet-Elbow02.stl
62 Ko · 72 707 téléchargements
-
stlShaft-Coupling01.stl
26 Ko · 72 683 téléchargements
-
stlOil-Cooler-Outlet101.stl
362 Ko · 72 695 téléchargements
-
stlInterm-Case-Cut02.stl
91 Ko · 72 684 téléchargements
-
stlReduction-Gear01b.stl
350 Ko · 72 721 téléchargements
-
stlStand101.stl
50 Ko · 72 654 téléchargements
-
stlAccy-Parts-PCU101.stl
114 Ko · 72 646 téléchargements
-
stlReduction-Panel02.stl
88 Ko · 72 658 téléchargements
-
stlReduction-Panel01.stl
133 Ko · 72 652 téléchargements
-
stlAir-Intake-Case101.stl
1.7 Mo · 72 681 téléchargements
-
stlImpeller-HP02.stl
666 Ko · 72 732 téléchargements
-
stlReduction-Gear02.stl
568 Ko · 72 669 téléchargements
-
stlCC-Flame-Tube03x95m.stl
582 Ko · 72 616 téléchargements
-
stlComp-HP-Diffuser01.stl
70 Ko · 72 634 téléchargements
-
stlOil-Cooler102.stl
431 Ko · 72 586 téléchargements
-
stlComp-Outlet-Case101.stl
1.2 Mo · 72 601 téléchargements
-
stlTurbine-Shaft01.stl
505 Ko · 72 575 téléchargements
-
stlReduction-Gear01a.stl
528 Ko · 72 593 téléchargements
-
stlAir-Intake-Cowling02.stl
162 Ko · 72 603 téléchargements
-
stlShaft-Brg-Spt01.stl
31 Ko · 72 557 téléchargements
-
stlShaft-Spacer04.stl
34 Ko · 72 572 téléchargements
-
stlOil-Press-Tx01.stl
209 Ko · 72 543 téléchargements
-
stlAir-Intake-Cowling301.stl
1.5 Mo · 72 572 téléchargements
-
stlRed-Prop-Shaft101.stl
298 Ko · 72 562 téléchargements
-
stlComp-IGV-Case02.stl
510 Ko · 72 542 téléchargements
-
stlCC-Aircase01.stl
721 Ko · 72 545 téléchargements
-
stlComp-Frt-Case02.stl
1.2 Mo · 72 515 téléchargements
-
stlCC-Flame-Tube02x95.stl
678 Ko · 72 521 téléchargements
-
stlExhaust-Duct101.stl
729 Ko · 72 507 téléchargements
-
stlComp-IGV-Case01.stl
602 Ko · 72 570 téléchargements
-
stlImpeller-LP02.stl
801 Ko · 72 615 téléchargements
-
stlCC-Flame-Tube01x95.stl
1.1 Mo · 72 518 téléchargements
-
stlExhaust-Duct102.stl
1 Mo · 72 514 téléchargements
-
stlOutlet-Elbow-Assy101.stl
3.8 Mo · 72 555 téléchargements
-
stlReduction-Panel03f.stl
116 Ko · 69 258 téléchargements
-
stlMount-Foot101.stl
194 Ko · 60 647 téléchargements
-
stlShaft-Coupling101.stl
51 Ko · 4 863 téléchargements
Description
This is a cutaway model of Turboprop Engine having following features for educational purpose.
Features are:
(1) Centrifugal (Impeller type) compressor
(2) Can type Combustion Chamber
(3) Axial Flow Turbine
(4) Reduction gears and propeller shaft
(5) Air inlet cowling with Oil Cooler Air Passage
Download files includes;
-files: STL Files
-images: STL File Figure and Index Picture for assembly Aid
Purchase Parts Information;
-Bearings
WBC6-12ZZ (6 x 12 x 4) 6ea - Assemble to outer holes of each Panel
F686ZZ(6 x 1 3x 5) 2ea - Assemble to center of each Panel
689ZZ (9 x 17 x 5) 2ea - For LP and HP Impeller
6900ZZ (10 x 22 x 6) 2ea - For Prop-Shaft, Turbine Shaft
-Aluminum Tubes
9mm dia x Appox. 70mm - as Compressor Rotor Shaft (Make slots both ends)
6mm dia x Appox. 100mm - as Turbine to Compressor Coupling Shaft
-Screws
Micro screws M1.4x3L - Appox. 70 ea - Direct screw-in to 1 mm dia hole (No nut),
Head side flange hole is 1.5 mm dia.
Screws M2 x 20L - 1ea - M2 Tap is used - Starter associate parts
Screws M2 x 10L - Appox. 12ea - M2 Tap is used - Red. Gear Panels associate parts and IGV
Screws M2 x 6L - Appox. 4ea - M2 Tap is used - Diffusers and Turb. Shaft Coupling
Assembly Points
- Rotors, Gear Train Set and Casings can be assembled and adjusted separately.
- Combustion Air Casing is slid to the outlet elbow assembly until aft end clears from the turbine case its bore at first. Then slide back to bore. Gluing is optional.
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
Total Net Print Time: Approx. 50 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted.
[Update] 2018.8.13
This is the original design for the followings. Please refer them.
- Mod Parts : https://www.thingiverse.com/thing:2416610
- Mod Parts2 : https://www.thingiverse.com/thing:2747907
- Mod Parts3 : https://www.thingiverse.com/thing:2792220
[Update] 2018.8.22
Add "Assembly Charts" (pdf format) and figures are added to assist for assembly.
[Update] 2018.9.4
Parts List including Mod-Parts and Identification of rotaing parts.
[Update] 20180913
Add the optional part "Reduction-Panel03f" for "Reduction-Panel03"
[Update] 20181025
Add "Mount-Foot101" called in "Assembly Charts"
[Update] 20190907
I have prepared the detailed Assembly Manual as an option for those who want to build this engine with a small amount of money. Please browse if you are interested in this.
https://cults3d.com/en/3d-model/tool/turboprop-engine-assembly-manual-option
[Update]20200506
"Flange-Screw01" figure added about M1.4 Screw.
[Update]20201018
Add "Shaft-Coupling 101.stl" having thicker wall.