Turboprop Engine
door konchan77
Printbare bestanden (72)
-
stlAccy-Parts-SM-Base101.stl
45 Ko · 73 285 downloads
-
stlOil-Cooler-Inlet201.stl
197 Ko · 73 073 downloads
-
stlAccy-Parts-FMU101.stl
71 Ko · 73 115 downloads
-
stlComp-Inter-Case01.stl
1.8 Mo · 73 088 downloads
-
stlReduction-Gear03.stl
275 Ko · 73 030 downloads
-
stlInterm-Case03a.stl
282 Ko · 73 031 downloads
-
stlTurbine-Case01b.stl
210 Ko · 73 044 downloads
-
stlTurbine-HP-NGV01.stl
225 Ko · 72 986 downloads
-
stlImp-Coupling01.stl
133 Ko · 72 965 downloads
-
stlShaft-Coupling03.stl
71 Ko · 72 929 downloads
-
stlInterm-Case02a.stl
254 Ko · 72 941 downloads
-
stlOil-Cooler101.stl
82 Ko · 72 920 downloads
-
stlTurbine-Shaft-Spacer02.stl
29 Ko · 72 927 downloads
-
stlInterm-Case-Cut01.stl
420 Ko · 72 899 downloads
-
stlComp-LP-Diffuser01.stl
68 Ko · 72 933 downloads
-
stlAccy-Parts-SM101.stl
61 Ko · 72 865 downloads
-
stlTurbine-IP-Rotor01.stl
489 Ko · 72 876 downloads
-
stlReduction-Gear-Flg02.stl
326 Ko · 72 850 downloads
-
stlTurbine-IP-NGV01.stl
343 Ko · 72 865 downloads
-
stlAccy-Parts-RH-Base101.stl
113 Ko · 72 809 downloads
-
stlTurbine-Case01a.stl
465 Ko · 72 860 downloads
-
stlReduction-Panel01a.stl
11 Ko · 72 816 downloads
-
stlTurbine-LP-Rotor01.stl
465 Ko · 72 822 downloads
-
stlCC-Aircase03.stl
333 Ko · 72 788 downloads
-
stlCC-Aircase04.stl
453 Ko · 72 760 downloads
-
stlAccy-Parts-SM102.stl
26 Ko · 72 780 downloads
-
stlTurbine-LP-NGV01.stl
429 Ko · 72 761 downloads
-
stlAir-Intake-Cover101.stl
219 Ko · 72 802 downloads
-
stlShaft-Brg-Spt02.stl
26 Ko · 72 761 downloads
-
stlShaft-Spacer201.stl
30 Ko · 72 716 downloads
-
stlReduction-Panel03.stl
61 Ko · 72 757 downloads
-
stlStand102.stl
15 Ko · 72 714 downloads
-
stlTurbine-HP-Rotor01.stl
471 Ko · 72 714 downloads
-
stlAir-Intake-Fairing101.stl
349 Ko · 72 727 downloads
-
stlReduction-Gear-Flg01.stl
103 Ko · 72 711 downloads
-
stlOutlet-Elbow02.stl
62 Ko · 72 707 downloads
-
stlShaft-Coupling01.stl
26 Ko · 72 683 downloads
-
stlOil-Cooler-Outlet101.stl
362 Ko · 72 695 downloads
-
stlInterm-Case-Cut02.stl
91 Ko · 72 684 downloads
-
stlReduction-Gear01b.stl
350 Ko · 72 721 downloads
-
stlStand101.stl
50 Ko · 72 654 downloads
-
stlAccy-Parts-PCU101.stl
114 Ko · 72 646 downloads
-
stlReduction-Panel02.stl
88 Ko · 72 658 downloads
-
stlReduction-Panel01.stl
133 Ko · 72 652 downloads
-
stlAir-Intake-Case101.stl
1.7 Mo · 72 681 downloads
-
stlImpeller-HP02.stl
666 Ko · 72 732 downloads
-
stlReduction-Gear02.stl
568 Ko · 72 669 downloads
-
stlCC-Flame-Tube03x95m.stl
582 Ko · 72 616 downloads
-
stlComp-HP-Diffuser01.stl
70 Ko · 72 634 downloads
-
stlOil-Cooler102.stl
431 Ko · 72 586 downloads
-
stlComp-Outlet-Case101.stl
1.2 Mo · 72 601 downloads
-
stlTurbine-Shaft01.stl
505 Ko · 72 575 downloads
-
stlReduction-Gear01a.stl
528 Ko · 72 593 downloads
-
stlAir-Intake-Cowling02.stl
162 Ko · 72 603 downloads
-
stlShaft-Brg-Spt01.stl
31 Ko · 72 557 downloads
-
stlShaft-Spacer04.stl
34 Ko · 72 572 downloads
-
stlOil-Press-Tx01.stl
209 Ko · 72 543 downloads
-
stlAir-Intake-Cowling301.stl
1.5 Mo · 72 572 downloads
-
stlRed-Prop-Shaft101.stl
298 Ko · 72 562 downloads
-
stlComp-IGV-Case02.stl
510 Ko · 72 542 downloads
-
stlCC-Aircase01.stl
721 Ko · 72 545 downloads
-
stlComp-Frt-Case02.stl
1.2 Mo · 72 515 downloads
-
stlCC-Flame-Tube02x95.stl
678 Ko · 72 521 downloads
-
stlExhaust-Duct101.stl
729 Ko · 72 507 downloads
-
stlComp-IGV-Case01.stl
602 Ko · 72 570 downloads
-
stlImpeller-LP02.stl
801 Ko · 72 615 downloads
-
stlCC-Flame-Tube01x95.stl
1.1 Mo · 72 518 downloads
-
stlExhaust-Duct102.stl
1 Mo · 72 514 downloads
-
stlOutlet-Elbow-Assy101.stl
3.8 Mo · 72 555 downloads
-
stlReduction-Panel03f.stl
116 Ko · 69 258 downloads
-
stlMount-Foot101.stl
194 Ko · 60 647 downloads
-
stlShaft-Coupling101.stl
51 Ko · 4 863 downloads
Beschrijving
This is a cutaway model of Turboprop Engine having following features for educational purpose.
Features are:
(1) Centrifugal (Impeller type) compressor
(2) Can type Combustion Chamber
(3) Axial Flow Turbine
(4) Reduction gears and propeller shaft
(5) Air inlet cowling with Oil Cooler Air Passage
Download files includes;
-files: STL Files
-images: STL File Figure and Index Picture for assembly Aid
Purchase Parts Information;
-Bearings
WBC6-12ZZ (6 x 12 x 4) 6ea - Assemble to outer holes of each Panel
F686ZZ(6 x 1 3x 5) 2ea - Assemble to center of each Panel
689ZZ (9 x 17 x 5) 2ea - For LP and HP Impeller
6900ZZ (10 x 22 x 6) 2ea - For Prop-Shaft, Turbine Shaft
-Aluminum Tubes
9mm dia x Appox. 70mm - as Compressor Rotor Shaft (Make slots both ends)
6mm dia x Appox. 100mm - as Turbine to Compressor Coupling Shaft
-Screws
Micro screws M1.4x3L - Appox. 70 ea - Direct screw-in to 1 mm dia hole (No nut),
Head side flange hole is 1.5 mm dia.
Screws M2 x 20L - 1ea - M2 Tap is used - Starter associate parts
Screws M2 x 10L - Appox. 12ea - M2 Tap is used - Red. Gear Panels associate parts and IGV
Screws M2 x 6L - Appox. 4ea - M2 Tap is used - Diffusers and Turb. Shaft Coupling
Assembly Points
- Rotors, Gear Train Set and Casings can be assembled and adjusted separately.
- Combustion Air Casing is slid to the outlet elbow assembly until aft end clears from the turbine case its bore at first. Then slide back to bore. Gluing is optional.
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
Total Net Print Time: Approx. 50 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted.
[Update] 2018.8.13
This is the original design for the followings. Please refer them.
- Mod Parts : https://www.thingiverse.com/thing:2416610
- Mod Parts2 : https://www.thingiverse.com/thing:2747907
- Mod Parts3 : https://www.thingiverse.com/thing:2792220
[Update] 2018.8.22
Add "Assembly Charts" (pdf format) and figures are added to assist for assembly.
[Update] 2018.9.4
Parts List including Mod-Parts and Identification of rotaing parts.
[Update] 20180913
Add the optional part "Reduction-Panel03f" for "Reduction-Panel03"
[Update] 20181025
Add "Mount-Foot101" called in "Assembly Charts"
[Update] 20190907
I have prepared the detailed Assembly Manual as an option for those who want to build this engine with a small amount of money. Please browse if you are interested in this.
https://cults3d.com/en/3d-model/tool/turboprop-engine-assembly-manual-option
[Update]20200506
"Flange-Screw01" figure added about M1.4 Screw.
[Update]20201018
Add "Shaft-Coupling 101.stl" having thicker wall.