microscope adjustable stand
by 8orge
Printable files (17)
-
stlTurning-knob-ornament1.stl
24 Ko · 2 398 downloads
-
stlBase_-_Ornament.stl
8 Ko · 2 390 downloads
-
stlTurning-knob-ornament4.stl
53 Ko · 2 361 downloads
-
stlRubber-adjuster-plate.stl
58 Ko · 2 397 downloads
-
stlScope-arm-left-ornament.stl
2 Ko · 2 386 downloads
-
stltop-ballbearing-mount-v2.stl
59 Ko · 2 403 downloads
-
stlTurning-knob-ornament3.stl
28 Ko · 2 384 downloads
-
stlScope-arm-right-ornament.stl
2 Ko · 2 366 downloads
-
stlTurning-knob-ornament6.stl
18 Ko · 2 359 downloads
-
stlTurning-knob-ornament2.stl
135 Ko · 2 365 downloads
-
stlSpindel-rod.stl
1.3 Mo · 2 450 downloads
-
stlBase_Rubber_Foot.stl
242 Ko · 2 370 downloads
-
stlTurning-knob.stl
858 Ko · 2 411 downloads
-
stlScope-arm.stl
1.9 Mo · 2 469 downloads
-
stlBase.stl
1.6 Mo · 2 433 downloads
-
stlSpindel-housing-v2.stl
371 Ko · 2 443 downloads
-
stlTurning-knob-ornament5.stl
1 Ko · 2 405 downloads
Description
This is a hight adjustable stand for a usb microscope .
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .