microscope adjustable stand
por 8orge
Archivos imprimibles (17)
-
stlTurning-knob-ornament1.stl
24 Ko · 2 398 descargas
-
stlBase_-_Ornament.stl
8 Ko · 2 390 descargas
-
stlTurning-knob-ornament4.stl
53 Ko · 2 361 descargas
-
stlRubber-adjuster-plate.stl
58 Ko · 2 397 descargas
-
stlScope-arm-left-ornament.stl
2 Ko · 2 386 descargas
-
stltop-ballbearing-mount-v2.stl
59 Ko · 2 403 descargas
-
stlTurning-knob-ornament3.stl
28 Ko · 2 384 descargas
-
stlScope-arm-right-ornament.stl
2 Ko · 2 366 descargas
-
stlTurning-knob-ornament6.stl
18 Ko · 2 359 descargas
-
stlTurning-knob-ornament2.stl
135 Ko · 2 365 descargas
-
stlSpindel-rod.stl
1.3 Mo · 2 450 descargas
-
stlBase_Rubber_Foot.stl
242 Ko · 2 370 descargas
-
stlTurning-knob.stl
858 Ko · 2 411 descargas
-
stlScope-arm.stl
1.9 Mo · 2 469 descargas
-
stlBase.stl
1.6 Mo · 2 433 descargas
-
stlSpindel-housing-v2.stl
371 Ko · 2 443 descargas
-
stlTurning-knob-ornament5.stl
1 Ko · 2 405 descargas
Descripción
This is a hight adjustable stand for a usb microscope .
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .