microscope adjustable stand
par 8orge
Fichiers imprimables (17)
-
stlTurning-knob-ornament1.stl
24 Ko · 2 415 téléchargements
-
stlBase_-_Ornament.stl
8 Ko · 2 407 téléchargements
-
stlTurning-knob-ornament4.stl
53 Ko · 2 376 téléchargements
-
stlRubber-adjuster-plate.stl
58 Ko · 2 412 téléchargements
-
stlScope-arm-left-ornament.stl
2 Ko · 2 401 téléchargements
-
stltop-ballbearing-mount-v2.stl
59 Ko · 2 420 téléchargements
-
stlTurning-knob-ornament3.stl
28 Ko · 2 399 téléchargements
-
stlScope-arm-right-ornament.stl
2 Ko · 2 381 téléchargements
-
stlTurning-knob-ornament6.stl
18 Ko · 2 374 téléchargements
-
stlTurning-knob-ornament2.stl
135 Ko · 2 381 téléchargements
-
stlSpindel-rod.stl
1.3 Mo · 2 466 téléchargements
-
stlBase_Rubber_Foot.stl
242 Ko · 2 386 téléchargements
-
stlTurning-knob.stl
858 Ko · 2 428 téléchargements
-
stlScope-arm.stl
1.9 Mo · 2 488 téléchargements
-
stlBase.stl
1.6 Mo · 2 451 téléchargements
-
stlSpindel-housing-v2.stl
371 Ko · 2 461 téléchargements
-
stlTurning-knob-ornament5.stl
1 Ko · 2 421 téléchargements
Description
This is a hight adjustable stand for a usb microscope .
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .