Goblin Tiny BJD
by black_hole_entropy
Printable files (16)
-
stllower_arm_mirror.stl
3.5 Mo · 1 332 downloads
-
stlface.stl
4.9 Mo · 1 455 downloads
-
stllower_leg_mirror.stl
5.4 Mo · 1 318 downloads
-
stllower_leg.stl
5.4 Mo · 1 364 downloads
-
stlchest.stl
27.4 Mo · 1 399 downloads
-
stllower_arm.stl
3.5 Mo · 1 338 downloads
-
stlupper_leg.stl
11.5 Mo · 1 405 downloads
-
stlupper_arm.stl
18.1 Mo · 1 356 downloads
-
stlhand1.stl
4.8 Mo · 1 329 downloads
-
stlheadcap.stl
5.3 Mo · 1 366 downloads
-
stltorso.stl
17.3 Mo · 1 375 downloads
-
stlfoot.stl
6.9 Mo · 1 336 downloads
-
stlhand2.stl
6.6 Mo · 1 309 downloads
-
stlupper_arm_mirror.stl
18.1 Mo · 1 313 downloads
-
stlupper_leg_mirror.stl
11.5 Mo · 1 320 downloads
-
stlfoot_mirror.stl
6.9 Mo · 863 downloads
Description
This is a little Goblin BJD which is remix of MoonlightJewel's remix of Dollightful's Bunny BJD.
- This BJD is tiny and stands at about 5.5 inches.
- You can use 2mm elastic to string it(diagram in the pictures) but due to the structure it will not take hooks so you will need to pull the elastic through the hands/feet. Start at the hands/feet and work your way up the limb/body with the elastic.
- Use a magnet in the head pieces to hold them together.
- Print hands and feet with supports to the plate only, otherwise you will ends up with supports on the piece itself under the fastening bar which will be a pain to remove.