Goblin Tiny BJD
par black_hole_entropy
Fichiers imprimables (16)
-
stllower_arm_mirror.stl
3.5 Mo · 1 332 téléchargements
-
stlface.stl
4.9 Mo · 1 455 téléchargements
-
stllower_leg_mirror.stl
5.4 Mo · 1 318 téléchargements
-
stllower_leg.stl
5.4 Mo · 1 364 téléchargements
-
stlchest.stl
27.4 Mo · 1 399 téléchargements
-
stllower_arm.stl
3.5 Mo · 1 338 téléchargements
-
stlupper_leg.stl
11.5 Mo · 1 405 téléchargements
-
stlupper_arm.stl
18.1 Mo · 1 356 téléchargements
-
stlhand1.stl
4.8 Mo · 1 329 téléchargements
-
stlheadcap.stl
5.3 Mo · 1 366 téléchargements
-
stltorso.stl
17.3 Mo · 1 375 téléchargements
-
stlfoot.stl
6.9 Mo · 1 336 téléchargements
-
stlhand2.stl
6.6 Mo · 1 309 téléchargements
-
stlupper_arm_mirror.stl
18.1 Mo · 1 313 téléchargements
-
stlupper_leg_mirror.stl
11.5 Mo · 1 320 téléchargements
-
stlfoot_mirror.stl
6.9 Mo · 863 téléchargements
Description
This is a little Goblin BJD which is remix of MoonlightJewel's remix of Dollightful's Bunny BJD.
- This BJD is tiny and stands at about 5.5 inches.
- You can use 2mm elastic to string it(diagram in the pictures) but due to the structure it will not take hooks so you will need to pull the elastic through the hands/feet. Start at the hands/feet and work your way up the limb/body with the elastic.
- Use a magnet in the head pieces to hold them together.
- Print hands and feet with supports to the plate only, otherwise you will ends up with supports on the piece itself under the fastening bar which will be a pain to remove.