Goblin Tiny BJD
por black_hole_entropy
Ficheiros imprimíveis (16)
-
stllower_arm_mirror.stl
3.5 Mo · 1 332 descargas
-
stlface.stl
4.9 Mo · 1 455 descargas
-
stllower_leg_mirror.stl
5.4 Mo · 1 318 descargas
-
stllower_leg.stl
5.4 Mo · 1 364 descargas
-
stlchest.stl
27.4 Mo · 1 399 descargas
-
stllower_arm.stl
3.5 Mo · 1 338 descargas
-
stlupper_leg.stl
11.5 Mo · 1 405 descargas
-
stlupper_arm.stl
18.1 Mo · 1 356 descargas
-
stlhand1.stl
4.8 Mo · 1 329 descargas
-
stlheadcap.stl
5.3 Mo · 1 366 descargas
-
stltorso.stl
17.3 Mo · 1 375 descargas
-
stlfoot.stl
6.9 Mo · 1 336 descargas
-
stlhand2.stl
6.6 Mo · 1 309 descargas
-
stlupper_arm_mirror.stl
18.1 Mo · 1 313 descargas
-
stlupper_leg_mirror.stl
11.5 Mo · 1 320 descargas
-
stlfoot_mirror.stl
6.9 Mo · 863 descargas
Descrição
This is a little Goblin BJD which is remix of MoonlightJewel's remix of Dollightful's Bunny BJD.
- This BJD is tiny and stands at about 5.5 inches.
- You can use 2mm elastic to string it(diagram in the pictures) but due to the structure it will not take hooks so you will need to pull the elastic through the hands/feet. Start at the hands/feet and work your way up the limb/body with the elastic.
- Use a magnet in the head pieces to hold them together.
- Print hands and feet with supports to the plate only, otherwise you will ends up with supports on the piece itself under the fastening bar which will be a pain to remove.