Macropad 4x4

di DiaTryma

File stampabili (12)

  • step

    Case.STEP

    354 Ko · 376 download

    Scarica
  • step

    KeyCap_Flat.STEP

    114 Ko · 364 download

    Scarica
  • step

    KeyCap_Indented.STEP

    225 Ko · 367 download

    Scarica
  • step

    MCU_Cover.STEP

    140 Ko · 362 download

    Scarica
  • step

    Switch_Plate.STEP

    799 Ko · 361 download

    Scarica
  • step

    Switch_Socket_Plate.STEP

    2.4 Mo · 367 download

    Scarica
  • stl

    Case.STL

    287 Ko · 423 download

    Scarica
  • stl

    KeyCap_Flat.STL

    92 Ko · 422 download

    Scarica
  • stl

    KeyCap_Indented.STL

    161 Ko · 428 download

    Scarica
  • stl

    MCU_Cover.STL

    66 Ko · 407 download

    Scarica
  • stl

    Switch_Plate.STL

    295 Ko · 406 download

    Scarica
  • stl

    Switch_Socket_Plate.STL

    3.4 Mo · 430 download

    Scarica

Descrizione

[NOTE: Certain patterning on the MCU Cover as seen in the photo have been removed from the CAD, it being a personal symbol of sorts. Feel free to edit the file to add whatever pattern desired]

16 key (4x4) macropad STEP and STL files.

Runs on an Arduino Pro Micro (CAD made around the board with soldered header pins), with the firmware created using QMK. Takes Kailh Box Cream Pro and Kailh Box Jade switches (snaps fit on Switch Plate). This uses Kailh hot-swap sockets (snaps fit on Switch Socket Plate)

The keykaps are designed to friction fit on the switches in a way that they can be removed without taking the stitch off the plate. However, depending on printer tolerances, feel free to edit the keycap stems.

Tag

#keyboard #macropad #mechanical keyboard