Macropad 4x4
par DiaTryma
Fichiers imprimables (12)
-
stepCase.STEP
354 Ko · 376 téléchargements
-
step
KeyCap_Flat.STEP
114 Ko · 364 téléchargements
-
step
KeyCap_Indented.STEP
225 Ko · 367 téléchargements
-
step
MCU_Cover.STEP
140 Ko · 362 téléchargements
-
step
Switch_Plate.STEP
799 Ko · 361 téléchargements
-
step
Switch_Socket_Plate.STEP
2.4 Mo · 367 téléchargements
-
stlCase.STL
287 Ko · 423 téléchargements
-
stlKeyCap_Flat.STL
92 Ko · 422 téléchargements
-
stlKeyCap_Indented.STL
161 Ko · 428 téléchargements
-
stlMCU_Cover.STL
66 Ko · 407 téléchargements
-
stlSwitch_Plate.STL
295 Ko · 406 téléchargements
-
stlSwitch_Socket_Plate.STL
3.4 Mo · 430 téléchargements
Description
[NOTE: Certain patterning on the MCU Cover as seen in the photo have been removed from the CAD, it being a personal symbol of sorts. Feel free to edit the file to add whatever pattern desired]
16 key (4x4) macropad STEP and STL files.
Runs on an Arduino Pro Micro (CAD made around the board with soldered header pins), with the firmware created using QMK. Takes Kailh Box Cream Pro and Kailh Box Jade switches (snaps fit on Switch Plate). This uses Kailh hot-swap sockets (snaps fit on Switch Socket Plate)
The keykaps are designed to friction fit on the switches in a way that they can be removed without taking the stitch off the plate. However, depending on printer tolerances, feel free to edit the keycap stems.